Integration of Smart Radio with QGroundControl and the Pixhawk 4 Flight Controller: References

• Related Articles

• Integration of Smart Radio with QGroundControl and the Pixhawk 4 Flight Controller: System Setup

  System Setup   Hardware setup with Pixhawk By default, the Pixhawk 4 supports telemetry on serial ports TELEM1 and TELEM2. The Smart Radio UART pinout can be found in the Smart Radio Integration Guide [6]. For details on how to setup a serial to ...

• Integration of Smart Radio with QGroundControl and the Pixhawk 4 Flight Controller: Introduction

  Introduction This guide expands on our previous application notes and guides for video streaming and wireless connectivity for Unmanned Aerial Systems [1, 2]. It demonstrates how a Doodle Labs Smart Radio can be used to send MAVlink telemetry data ...

• Integration of Smart Radio with QGroundControl and the Pixhawk 4 Flight Controller: Testing

  Testing We tested the two setups described above with a PC running QGC in Linux, and a Tablet running QGC in Android.   Video Streaming You can view your video stream directly in QGC by navigating to the Application Settings menu and scrolling down ...

• ModalAI VOXL2 + Smart Radio Integration Guide: Smart Radio VOXL Integration

  Smart Radio VOXL Integration Updating VOXL Firmware Older versions of VOXL’s firmware do not include the necessary USB-Ethernet driver required by the Smart Radio Helix. Make sure to update your VOXL firmware following the instructions on the website ...

• Smart Radio GCS Reference Design: Important Notes and References

  Important Notes Multiple Radios There are three main links between the UAV and the GCS, telemetry, Video, and RC control. The Smart Radio can be used for all three links, and if necessary, the RC and Telemetry links can go over MAVLink. Using ...