Videos: Navigating the GUI
Navigating the GUI -- Sept. 2022
Topics
- This provides an explanation of Basic vs. Advanced Settings options
- Initial walk-through of key configuration screens
- Status overview
- Simple configuration
- Wireless radio settings
- System Backup / Reset to defaults / Upgrade Firmware
- Dynamic Mesh
- Mesh Map
- This is a walk-through for a first time user
- Applies to new users and all product type
Related Articles
Videos: Resetting the Smart Radio to Factory Default
Videos: Resetting the Smart Radio to Factory Default Link: https://www.loom.com/share/b2704cce4f9541fb9a87f0b58b40c92a Topics How to restore radio to a known state in the event of a corrupted configuration With IPv4 access Through the GUI Through ...
Videos: Measuring Maximum link capacity and Realtime Data traffic
Videos: Measuring Maximum link capacity and Realtime Data traffic– Oct 2022 Link: https://www.loom.com/share/f00df9c97d4447159c8550d1c83b4a26 Topics This explains how to measure maximum link capacity with the iPerf3 utility either internal to the ...
Videos: Introduction to Mesh Mode
Mesh Mode – Aug. 2022 Link: https://www.loom.com/share/8ad599b71eec42c8bb83f97d24957452 Topics Explanation of Mesh topology Key configuration parameters for Mesh mode Using Simple configuration to verify and reset Mesh Mode Mesh Map *Applicable to ...
Videos: Introduction to Traffic Prioritization
Introduction to Traffic Prioritization Link: https://www.loom.com/share/b64e59bccf734c44bca5132e49dd6d74 Topics This explains how the Smart Radio uses Differentiated Services along with our URLLCFeature to prioritize specific data traffic, i.e., ...
Videos: Choosing an operating frequency
Choosing an operating frequency – Jan. – 2022 Link: https://www.loom.com/share/982847e585e740e789e7a697b93e1209 Topics This explains how to choose an operating frequency based on link distance, interference, and RF Line of sight / Fresnel zone ...