Remote Management Guide for Smart Radio - Appendix A – Using SSH

Remote Management Guide for Smart Radio - Appendix A – Using SSH

Appendix A – Using SSH

 

The followings are some examples of remotely executing a command via SSH to obtain network information from the node.

ssh root@10.223.134.70 ‘iw wlan0 info’

Lists the current configuration of wlan0

ssh root@10.223.134.70 ‘iw wlan0 station dump’

shows connection information to all currently connected stations.

ssh root@10.223.134.70 ‘iw wlan0 list’

shows the capabilities of the wlan0 interface. An example output is shown below.

root@LEDE:~# iw dev wlan0 info
Interface wlan0
          ifindex 13
          wdev 0x7
          addr 00:30:1a:4e:86:46
          type mesh point
          wiphy 0
          channel 12 (915 MHz), width: 20 MHz, center1: 915 MHz
          txpower 32.00 dBm