1. Introduction to the Smart Radio GPS Usage and Configuration Guide
Further information on the GPS receiver can
be found here [1]. Here are the feature highlights:
·
The GPS receiver supports the
concurrent reception of following satellite constellations:
o
GPS L1C/A
o
SBAS L1C/A
o
QZSS L1C/A
o
GLONASS L1OF
o
BeiDou B1
o
Galileo E1B/C
·
General Specifications
o
1.5-m accuracy
o
-163 dBm tracking sensitivity
o
0.01 m/s velocity accuracy
o
10 Hz max fix rate
o
SBAS, QZSS, RTCM 2.3
Differential GPS
Related Articles
5. References for Smart Radio GPS Usage and Configuration Guide
References 1. Teseo-LIV3f, https://www.st.com/resource/en/datasheet/teseo-liv3f.pdf, September 2019 2. Remote Management Guide for Smart Radio, https://doodlelabs.com/wp-content/uploads/Remote-Management-Guide-for-Smart-Radio-V1020.pdf, ...
1. Introduction to the Smart Radio Configuration Guide
Introduction The purpose of this guide is to aid in the software configuration of the Smart Radio. This guide is organized as follows. 1. Smart Radio Settings (For all models) 2. Model Specific Configuration 3. System Configuration ...
2. GPS Hardware Configuration
-W variants of the Smart Radio uses an internal GPS antenna, so no hardware configuration is necessary. -J variants of the Smart Radio include a GPS RF port on the casing. Please refer to the latest Integration Guide availble in the online Technical ...
Doodle Labs Smart Radio Serial Interface Guide - Introduction
Introduction The Smart Radio runs a customized version of Openwrt with enhancements related to the Doodle Labs Mesh Rider® technology. These enhancements are useful for applications requiring low-latency command-and-control transmission and ...
Introduction to Remote Management Guide for Smart Radio
Remote Management Guide for Smart Radio Advanced Mesh Router for Private Wireless Networks Introduction The Smart Radio runs the Mesh Rider OS. It is a customized version of Openwrt with enhancements useful for applications requiring low-latency ...