Videos: Logging into the Smart Radio for the 1st time
Logging into the Smart Radio for the 1st time – August 2022
Notes
- This explains how to login with Default I.P. address
- If the default I.P. address is changed / unknown how to logging in with the fallback I.P. address
- How to determining the I.P. address from the MAC address
- The physical interface option for logging into each series of radio
- The applies to new users and anyone that does not have access to the default I.P. address
- All product types are covered
Related Articles
Videos: Resetting the Smart Radio to Factory Default
Videos: Resetting the Smart Radio to Factory Default Link: https://www.loom.com/share/b2704cce4f9541fb9a87f0b58b40c92a Topics How to restore radio to a known state in the event of a corrupted configuration With IPv4 access Through the GUI Through ...
6. Smart Radio Network Topologies
Smart Radio Network Topologies The Smart Radio supports several different network configurations. The Simple Config menu makes it easy to configure the radio. The Simple Config menu is accessed in the web GUI at network → simple config. Basic Network ...
Introduction to Remote Management Guide for Smart Radio
Remote Management Guide for Smart Radio Advanced Mesh Router for Private Wireless Networks Introduction The Smart Radio runs the Mesh Rider OS. It is a customized version of Openwrt with enhancements useful for applications requiring low-latency ...
Videos: How to upgrade your Smart Radio Firmware
Firmware Upgrade -- June 2022 Link: https://www.loom.com/share/19e62caa873643c1b8efcd0574dc48c4 Topics How to download the firmware from the website and how to apply the upgrade to the Smart Radio *Applicable to all users and product types.
5. Additional Smart Radio Ports
Additional Smart Radio Ports UART The UART port is a standard TTL level 3-pin serial port (RX, TX, GND). The UART port can be used directly with directly with flight controllers such as the PixHawk 4. It is also possible to setup a network to serial ...