Videos: Choosing an operating frequency
Choosing an operating frequency – Jan. – 2022
- This explains how to choose an operating frequency based on link distance, interference, and RF Line of sight / Fresnel zone
*Applicable to new users and Smart Radios.
Videos: Resetting the Smart Radio to Factory Default
Videos: Resetting the Smart Radio to Factory Default Link: https://www.loom.com/share/b2704cce4f9541fb9a87f0b58b40c92a Topics How to restore radio to a known state in the event of a corrupted configuration With IPv4 access Through the GUI Through ...
Videos: Measuring Maximum link capacity and Realtime Data traffic
Videos: Measuring Maximum link capacity and Realtime Data traffic– Oct 2022 Link: https://www.loom.com/share/f00df9c97d4447159c8550d1c83b4a26 Topics This explains how to measure maximum link capacity with the iPerf3 utility either internal to the ...
Videos: How to use a Link Budget calculation tool
How to use a Link Budget calculation tool – Jan 2022 Link: https://www.loom.com/share/8e36fc7f95f24112a4db9598a5bb61fc Topics This explains how to use the Link budget calculator to estimate the link fade margin based on frequency, distance, and ...
Videos: Navigating the GUI
Navigating the GUI -- Sept. 2022 Link: https://www.loom.com/share/81bb92172b0844f88d38cb21df09826e Topics This provides an explanation of Basic vs. Advanced Settings options Initial walk-through of key configuration screens Status overview ...
Videos: Introduction to Mesh Mode
Mesh Mode – Aug. 2022 Link: https://www.loom.com/share/8ad599b71eec42c8bb83f97d24957452 Topics Explanation of Mesh topology Key configuration parameters for Mesh mode Using Simple configuration to verify and reset Mesh Mode Mesh Map *Applicable to ...