Videos: Introduction to Traffic Prioritization
Introduction to Traffic Prioritization
Topics
- This explains how the Smart Radio uses Differentiated Services along with our URLLCFeature to prioritize specific data traffic, i.e., Command & Control data into QoS queues to optimize for low-latency, and throughput, and how to configure.
- It also explains how the Diversity Rates Only configuration is used to ensure link resilience in a mobile use case.
*Applicable to new users and Smart Radios.
Related Articles
Videos: Measuring Maximum link capacity and Realtime Data traffic
Videos: Measuring Maximum link capacity and Realtime Data traffic– Oct 2022 Link: https://www.loom.com/share/f00df9c97d4447159c8550d1c83b4a26 Topics This explains how to measure maximum link capacity with the iPerf3 utility either internal to the ...
Videos: Introduction to Mesh Mode
Mesh Mode – Aug. 2022 Link: https://www.loom.com/share/8ad599b71eec42c8bb83f97d24957452 Topics Explanation of Mesh topology Key configuration parameters for Mesh mode Using Simple configuration to verify and reset Mesh Mode Mesh Map *Applicable to ...
Videos: Introduction to WDS AP/Client and Dynamic Mesh Mode
WDS AP/Client and Dynamic Mesh Mode – Aug. 2022 Link: https://www.loom.com/share/583cd702455c47b49d78434327eefa30 Topics Explains the use case for WDS AP / Client mode and how to configure Explains Dynamic Mesh features and how to upload a license ...
Antenna Recommendations for UAS: Introduction
Introduction Antennas play an important role to get the maximum performance from the Doodle Labs radios. This document provides general antenna recommendations for UAS use cases. The document is organized as follows · Antenna Considerations o ...
Smart Radio LTE Failover: Introduction
Introduction This application note describes how to use LTE as a failover for the Smart Radio’s Mesh Rider wireless link. Smart Radio LTE Failover is an optional add-on license to the Mesh Rider OS to create highly resilient private wireless ...