Videos: Measuring Maximum link capacity and Realtime Data traffic
Videos: Measuring Maximum link capacity and Realtime Data traffic– Oct 2022
- This explains how to measure maximum link capacity with the iPerf3 utility either internal to the Smart Radio, or external from a PC. This is done through the Command Line Interface (CLI) .
- It also explains how to use the Smart Radio’s bmon utility to display the real-time data traffic via the CLI.
*Applicable to new users and Smart Radios.
Videos: Introduction to Traffic Prioritization
Introduction to Traffic Prioritization Link: https://www.loom.com/share/b64e59bccf734c44bca5132e49dd6d74 Topics This explains how the Smart Radio uses Differentiated Services along with our URLLCFeature to prioritize specific data traffic, i.e., ...
Optimizing the RF Link: Factors affecting the RF link
Factors affecting the RF link By the laws of physics, the RF link range can be expressed in simple terms as Unpacking this shows us that many factors affect the RF link range. Here we list the major factors affecting the RF link and we will briefly ...
Videos: How to use a Link Budget calculation tool
How to use a Link Budget calculation tool – Jan 2022 Link: https://www.loom.com/share/8e36fc7f95f24112a4db9598a5bb61fc Topics This explains how to use the Link budget calculator to estimate the link fade margin based on frequency, distance, and ...
5. Troubleshooting Link Quality
Troubleshooting Link Quality This section covers troubleshooting problems with the link quality. If you are looking for information on optimizing the link quality, please read the guide, “Optimizing the RF Link”, in our technical library . This ...
Videos: Resetting the Smart Radio to Factory Default
Videos: Resetting the Smart Radio to Factory Default Link: https://www.loom.com/share/b2704cce4f9541fb9a87f0b58b40c92a Topics How to restore radio to a known state in the event of a corrupted configuration With IPv4 access Through the GUI Through ...