GPS Usage and Configuration Guide
5. References for Smart Radio GPS Usage and Configuration Guide
References 1. Teseo-LIV3f, https://www.st.com/resource/en/datasheet/teseo-liv3f.pdf, September 2019 2. Remote Management Guide for Smart Radio, https://doodlelabs.com/wp-content/uploads/Remote-Management-Guide-for-Smart-Radio-V1020.pdf, ...
4. GPS Status
The GPS receiver’s status is shown in the Status → Overview webpage. An example output is shown in Figure 2. Figure 2 – GPS status It is also possible to remotely poll the GPS status using any of the methods described in the Remote Management Guide ...
3. GPS Configuration
Generally speaking, it should not be necessary to configure the internal GPS receiver. However, there is a GPS receiver configuration page in the web GUI under network → GPS Configuration. Figure 1 shows a screenshot of the page. If you are using ...
2. GPS Hardware Configuration
-W variants of the Smart Radio uses an internal GPS antenna, so no hardware configuration is necessary. -J variants of the Smart Radio include a GPS RF port on the casing. Please refer to the latest Integration Guide availble in the online Technical ...
1. Introduction to the Smart Radio GPS Usage and Configuration Guide
The purpose of this guide is to instruct the user on how to configure and view the status of the GPS receiver. GPS is an optional feature in Doodle Labs’ Smart Radios and is available in -W and -J hardware variants and when ordered with the -G order ...