Smart Radio Configuration Guide
10. Appendix B - Extending the Smart Radio Functionality
Appendix B – Extending the Smart Radio Functionality Doodle Labs can supply an Image Builder Software Development Kit (SDK) for interested customers. The SDK allows customers to build custom packages and package them into a custom firmware image. It ...
9. Appendix A - Application Notes
Appendix A – Application Notes Doodle Labs has developed many application notes for Smart Radio. They are available in the Technical Library section of the website. Below list shows some of the commonly used application notes. 1. Optimizing the ...
References
References Technical Library, https://doodlelabs.com/technologies/tech-library/technical-library-application-notes/, Feb 18 2022
8. Backup and Upgrade
Backup and Upgrade Configuration Backup You can create a backup of your configuration in the web GUI by navigating to system → backup/flash firmware and clicking Generate Archive. Firmware Upgrade The Mesh Rider OS can be upgraded Over the Air (OTA) ...
7. Centralized Configuration, ACS, and Link Recovery
Centralized Configuration, ACS, and Link Recovery With the release of the 2022-02 update of the Mesh Rider OS comes a new Centralized Configuration utility along with automatic channel selection (ACS), and link recovery. All three features use the ...
6. Smart Radio Network Topologies
Smart Radio Network Topologies The Smart Radio supports several different network configurations. The Simple Config menu makes it easy to configure the radio. The Simple Config menu is accessed in the web GUI at network → simple config. Basic Network ...
5. Additional Smart Radio Ports
Additional Smart Radio Ports UART The UART port is a standard TTL level 3-pin serial port (RX, TX, GND). The UART port can be used directly with directly with flight controllers such as the PixHawk 4. It is also possible to setup a network to serial ...
4. System Configuration using the CLI
System Configuration using the CLI The Smart Radio runs the Linux kernel, and many Linux utilities such as ifconfig, iw, and ip are pre-installed on the radio. Generally speaking we can divide CLI tasks that a user may wish to perform into persistent ...
1. Introduction to the Smart Radio Configuration Guide
Introduction The purpose of this guide is to aid in the software configuration of the Smart Radio. This guide is organized as follows. 1. Smart Radio Settings (For all models) 2. Model Specific Configuration 3. System Configuration ...
3. Model Specific Configuration
The Wearable (and OEM) and Helix model variants have addition configuration options compared to the defaults discussed in the section above. Wearable/OEM Variant (-K) The Wearable/OEM variant of the Smart Radio includes a WiFi radio along with some ...
2. Smart Radio Settings (For all models)
Default Network Configuration The Smart Radio runs Doodle Labs Mesh Rider® OS, a customized version of Openwrt with enhancements. These enhancements are useful for applications requiring low-latency command-and-control transmission, HD Video, ...