4. System Configuration using the CLI
System Configuration using the CLI The Smart Radio runs the Linux kernel, and many Linux utilities such as ifconfig, iw, and ip are pre-installed on the radio. Generally speaking we can divide CLI tasks that a user may wish to perform into persistent ...
5. Additional Smart Radio Ports
Additional Smart Radio Ports UART The UART port is a standard TTL level 3-pin serial port (RX, TX, GND). The UART port can be used directly with directly with flight controllers such as the PixHawk 4. It is also possible to setup a network to serial ...
8. Backup and Upgrade
Backup and Upgrade Configuration Backup You can create a backup of your configuration in the web GUI by navigating to system → backup/flash firmware and clicking Generate Archive. Firmware Upgrade The Mesh Rider OS can be upgraded Over the Air (OTA) ...
Videos: Introduction to WDS AP/Client and Dynamic Mesh Mode
WDS AP/Client and Dynamic Mesh Mode – Aug. 2022 Link: https://www.loom.com/share/583cd702455c47b49d78434327eefa30 Topics Explains the use case for WDS AP / Client mode and how to configure Explains Dynamic Mesh features and how to upload a license ...
ModalAI VOXL2 + Smart Radio Integration Guide: Introduction
Introduction VOXL is an autonomous computing platform built by ModalAI and based on the Qualcomm Snapdragon 821. The VOXL computing platform combined with a depth camera, flight controller and the Doodle Labs Smart Radio forms the core of fully ...