Smart Radio Troubleshooting Guide
7. Smart Radio Troubleshooting Guide - References
References [1] Doodle Labs Technical Library, Technical Library For Mobile Industrial Mesh Radios | Doodle Labs, September 2021 [2] Coax Calculator, https://www.qsl.net/co8tw/Coax_Calculator.htm, September 2021
6. Crashes, Reboots, etc
The Smart Radios are designed to take a beating. That said, no system is perfect and if you find that the radios are misbehaving, consider the points below. Unexpected wireless down time If the Smart Radio is under heavy network load for hours or ...
4. UART and USB ports
UART and USB ports This section covers common pitfalls encountered when using the USB and UART ports. Please note that for -H hardware, the auxiliary port is either USB or UART, but not both (See Table 1). UART Troubleshooting The UART port is ...
5. Troubleshooting Link Quality
Troubleshooting Link Quality This section covers troubleshooting problems with the link quality. If you are looking for information on optimizing the link quality, please read the guide, “Optimizing the RF Link”, in our technical library [1]. This ...
3. Troubleshooting Radio Access
Troubleshooting Radio Access This section deals with problems accessing the radios. As explained in the System Overview section, in order to access the radios themselves, host machines do need to be on the same subnet as the Smart Radios. “I have ...
2. System Overview
System Overview Fig. 1 shows the default network configuration of the Smart Radio. The radios are pre-configured so that the entire Mesh Rider network acts like one big distributed Ethernet switch. Therefore, devices plugged into Mesh Rider will ...
1. Introduction to the Smart Radio Troubleshooting Guide
Introduction This is a troubleshooting guide for all Smart Radio models. The Smart Radio runs Doodle Labs Mesh Rider® OS. This guide is organized in the following sections · System Overview · Troubleshooting radio access · ...