Popular Articles
4. System Configuration using the CLI
System Configuration using the CLI The Smart Radio runs the Linux kernel, and many Linux utilities such as ifconfig, iw, and ip are pre-installed on the radio. Generally speaking we can divide CLI tasks that a user may wish to perform into persistent ...
5. Additional Smart Radio Ports
Additional Smart Radio Ports UART The UART port is a standard TTL level 3-pin serial port (RX, TX, GND). The UART port can be used directly with directly with flight controllers such as the PixHawk 4. It is also possible to setup a network to serial ...
8. Backup and Upgrade
Backup and Upgrade Configuration Backup You can create a backup of your configuration in the web GUI by navigating to system → backup/flash firmware and clicking Generate Archive. Firmware Upgrade The Mesh Rider OS can be upgraded Over the Air (OTA) ...
Videos: Introduction to WDS AP/Client and Dynamic Mesh Mode
WDS AP/Client and Dynamic Mesh Mode – Aug. 2022 Link: https://www.loom.com/share/583cd702455c47b49d78434327eefa30 Topics Explains the use case for WDS AP / Client mode and how to configure Explains Dynamic Mesh features and how to upload a license ...
ModalAI VOXL2 + Smart Radio Integration Guide: Introduction
Introduction VOXL is an autonomous computing platform built by ModalAI and based on the Qualcomm Snapdragon 821. The VOXL computing platform combined with a depth camera, flight controller and the Doodle Labs Smart Radio forms the core of fully ...